- Posted on
- • Geiger Muller Tubes
J305βγ GM tube light sensitivity to UV
- Author
-
-
- User
- Mr Blinky
- Posts by this author
- Posts by this author
-
My J305βγ tube is very light sensitive so I made a quick video demonstrating this. I shine daylight (on a miserable cloudy grey day) on the tube at first, then a 365nm UV flashlight and finish off with daylight again. The effects seem to work only at the anode end and not at the cathode end. Doing a little research I found that the light sensitivity of GM tubes only occurs in glass walled tubes that have an external cathode. The specifications show this about the tube wall: Tin oxide Cathode, Coaxial cylindrical thin shell structure (Wall density 50+-10cg/cm2). The cathode is on the exterior of the tube and you can see in the picture that is doesn't cover the whole length of the tube, but has an insulating gap at the anode end of about 7mm. The cathode is connected to the terminal cap by a little wire glued down with some kind of resin. (The resin looks like JB Weld!)
It is hard to see, and much easier by eye than camera, but you can just make out the end of the Tin oxide coating on the outside of the tube.
Here is the video I made:
For those interested, here are the specs of the tube:
Archived from radmon.org - originally posted 29/01/2023
Add Comment
This policy contains information about your privacy. By posting, you are declaring that you understand this policy:
- Your name, rating, website address, town, country, state and comment will be publicly displayed if entered.
- Aside from the data entered into these form fields, other stored data about your comment will include:
- Your IP address (not displayed)
- The time/date of your submission (displayed)
- Your email address will not be shared. It is collected for only two reasons:
- Administrative purposes, should a need to contact you arise.
- To inform you of new comments, should you subscribe to receive notifications.
- A cookie may be set on your computer. This is used to remember your inputs. It will expire by itself.
This policy is subject to change at any time and without notice.
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from submitting further comments.
These terms and conditions are subject to change at any time and without notice.
Comments